KIT Generador de tono + Tester de Cable + Estuche Fluke Networks
- Recolección del cliente,
- Mensajero
- Detalladamente
IntelliTone Pro 200 Kit MT-8200-60A
Includes IntelliTone Pro 200 Toner and 200 Probe, coax F connector adapter, two RJ11 and two RJ45 patch cables, test leads with alligator clips, lanyards,
Specifications
General
Operating temperature 32 °F to 104 °F (0 °C to 40 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity
(% RH without condensation)
95% (50 °F to 95 °F; 10 °C to 35 °C)
75% (95 °F to 104 °F; 35 °C to 40 °C)
Uncontrolled < 50 °F (< 10 °C)
Vibration Random, 2 g, 5 Hz - 500 Hz
Shock 1 m drop test with and without module
Safety EN 61010-1 1st Edition + Amendments 1, 2
Altitude 3000 m
EMC EN 61326-1
Battery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor
control, security, generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks. POTS telecom service.
Toner
Dimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display LED
Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling,
Banana jack plugs (2) - two conductor wiring
Toner frequency IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs
Talk battery voltage 6 V into 600 W
Output power 5 V p-p
Voltage protection 100 V
Auto power down Turns off automatically after 2.5 hours of inactivity
Probe
Dimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display (8) LED indicators, Synch LED indicator
Audio IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal
Control Thumbwheel switch, volume control wheel
Tone detection Detects IntelliTone™ digital signal for Locate, Isolate and CableMap
Detects Analog SmartTone Signal (500-1200Hz) and other analog toners.
Toner interface Main Mod8 port for cablemap on all four pairs of UTP / STP cabling
Auto power down Turns off automatically after one hour of inactivity